artemis Cine Broadcast 1.74in Volt Post, no Gimbal, Basic Set, V-Mount

KK.0037477

artemis Cine Broadcast 1.74in Volt Post, no Gimbal, Basic Set, V-Mount

This special version of the artemis Cine Broadcast was developed for use with the M1 Volt™ gimbal. In order to correspond to the dimensions of the M1 Volt™ gimbal, the artemis carbon center post was specially manufactured with an outside diameter of 1.74 in. Like the 1.8in standard two section artemis carbon post, the version for the Volt has a fine trim length adjustment for the torsion-free guided ø1.5in inner post.

Features:
12V/24V, high capacity wiring
Hot Swap based battery management
2 x HD SDI and 1 x SD video lines
Tally
Telescopic post 1.74in with fine trim length adjustment

Equipped with three V-Mount battery mounts.

Note:
Docking bracket and monitor bracket is not included.

The customer has to take care of the installation and commissioning of the Volt™ gimbal. This is done at your own risk.

Parts of the set

  • K2.0037382, artemis Cine Broadcast 1.74in Volt Post, no Gimbal, V-Mount
  • K2.0010319, artemis Docking Bracket, 1.8in
  • K2.0010461, Post Tool for artemis and TRINITY
  • K2.0010437, Hex Key 1.5mm
  • K2.0010436, Hex Key 2mm
  • K2.0010446, artemis Focus Bracket
  • K2.0010448, Universal Focus Bracket for Preston
  • K2.0010470, Cam Power, Cine, 12V, XLR, HiCap
  • K2.0010471, Cam Power, Cine, 24V, Fischer 2pin
  • K2.0010538, Cam Power, Cine, 12V, HiCap, ALEXA
  • K2.0010540, Cam Power, Cine, 12V, HiCap, ALEXA Mini
  • K2.0037459, Volt Pwr Cable 0B 3p - 0S 4p 0.3m/0.9ft