K0.0012288 | KK.0020649
Set including a Transvideo StarliteHD5 monitor. Equipped with three Gold-Mount battery mounts. Note: The K0 set will come with two foam inserts which will fit into the Pe...
K0.0012289 | KK.0020651
Set including a Transvideo StarliteHD5 monitor. Equipped with three V-Mount battery mounts. Note: The K0 set will come with two foam inserts which will fit into the Pelic...
K0.0019507 | KK.0020652
Equipped with three Gold-Mount battery mounts. Note: The K0 set will come with two foam inserts which will fit into the Pelican 1615 Air case and the SKB 3i-2317-14BE ca...
K0.0019508 | KK.0020653
Equipped with three V-Mount battery mounts. Note: The K0 set will come with two foam inserts which will fit into the Pelican 1615 Air case and the SKB 3i-2317-14BE case. ...
K2.0018851
The SAM-1 offers optical-centered mounting of ALEXA Classic, XT, SXT and LF cameras (not ALEXA Studio, ALEXA M or ALEXA 65) on the ARRI Trinity and MAXIMA system. The SAM-1...
KK.0016116
Stabilizer Adapter Mount SAM-2 for ALEXA Mini with a rod mounting bracket and two single rods ⌀19mm designed to support lens motors driving Ultra primes and Master Prime le...
K2.0014215
The SAM-2 offers optical-centred mounting of ALEXA Mini cameras to the ARRI Trinity and MAXIMA systems. The SAM-2 is also compatible with third party stabilizer systems fit...
K2.0014630
The SAM-3 offers optical-centred mounting of AMIRA cameras to the ARRI Trinity and MAXIMA systems. The SAM-3 is also compatible with third party stabilizer systems fitted w...
K2.0033662
The Stabilizer Adapter Mount SAM-4 allows some non-ARRI cameras equipped with ARRI PCA to fit the range of stabilizer units from ARRI CSS.
K2.0019295
Reinforced dovetail plate for SRH-3, TRINITY, MAXIMA
K2.0019294
K2.0033425
This extra long dovetail plate should be used when extra long lenses are mounted to the camera. Length: 450mm / 17.7 in. Note: The 450mm Quicklock Camera Plate can be used ...
K2.0035956
This compact and lightweight Stabilizer System Bracket can be mounted at the top of the ring of the TRINITY or the MAXIMA. The SSB-1 can be also mounted at the front and b...
KK.0033710
The set consists of two different counterweights: The larger counterweight weighs 300 gr / 0.66 lb, the two smaller counterweights weigh 150 gr / 0.33 lb each. The small co...
K2.0031236
The set includes the counterweight consisting of two half shells and two Delrin adapters for the 1.8in and the 1.5 in center post. The Delrin adapters make it possible to ...
K2.0014264
Modular center post extension to extent the 1.8in artemis center post by 8.5in/216mm. Lemo 3B connectors and internal main cable wiring.
K2.0019260
Modular center post extension to extent the 1.8in artemis center post by 8.5in/216mm. Lemo 2B connectors and internal main cable wiring.
K2.0010569
Extents the length of the bent gimbal handle by 35mm/1,37in.
K2.0014280
Knurled Handle Gimbal Extension adds a second knurled handle to the upper side of the 1.8in artemis Gimbal. Knurled Handle Gimbal Extension gives more control and a better ...
K2.0016402
This little add-on bracket will add extra protection to the video sockets and the joystick main cable socket at the front panel of the TRINITY.
K2.0010288
Battery mount for Gold Mount batteries, with Lemo 1B 2pin plug.
K2.0010289
Battery mount for V-Mount batteries, with Lemo 1B 2pin plug.
K2.0010297
Plain bracket to mount transmitters, recorders or other accessories.
K2.0010287
Thumb control for the tilt axes of the TRINITY. Including: K2.0014805, Joystick Main Cable K2.0014801, Monitor Power Cable, ARRI Starlight, 5pin K2.0014803, Monitor Power C...
K0.0019496
Alternativ monitor mount for the use of the ARRI Starlite monitor with the TRINITY.
K0.0019500
Alternativ monitor mount for the use of the SmallHD 5" monitor with the TRINITY.
K2.0010319
Docking Bracket for all artemis systems using the 1.8in post and the wide docking ring ø2.5in.
K2.0012159
By adding a second top stage to the top of the post the TRINITY can be converted into a regular artemis stabilizer, after the TRINITY head had been removed. The camera powe...
K2.0010433
Steel C-Stand with detachable Turtle Base.
K2.0015659
To convert a TRINITY rig with Gold Mount battery mounts (K0.0012288) into a regular artemis stabilizer, the Sled Cine Broadcast will be needed.
K2.0015658
To convert a TRINITY rig with V-Mount battery mounts (K0.0012289) into a regular artemis stabilizer, the Sled Cine Broadcast will be needed.
K2.0010321
artemis Monitor Bracket for the Transvideo 6in Cine HD monitors.
K2.0010322
artemis Monitor Bracket for the Transvideo 8in Cine HD monitors.
K2.0015385
The Multi Support Plate MSP-1 for the TRINITY allows to use the TRINITY head as a standalone handheld two axis fully stabilized gimbal. The MSP-1 includes Rosettes which ...
K2.0010426
Allows to use the MAXIMA QL mounted onto the Spider (K2.0010425) with dollies and cranes, which using Euro mount.
K2.0010427
Allows to use the MAXIMA QL mounted onto the Spider (K2.0010425) with dollies and cranes, which using Mitchell mount.
K2.0010470
12V XLR high capacity camera power cable, Lemo 1B 4pin to XLR 4pin, for video cameras, ARRI SR I, ARRI SR II, Aaton.
K2.0010471
24V camera power, Lemo 1S 3pin to Fischer 2pin, for ARRI SR III, LT, 435, 535.
K2.0020467
24V camera power cable, Lemo 1S 3pin to Lemo 2B 8pin, for ARRI ALEXA Mini & AMIRA.
K2.0010538
12V high capacity camera power cable, Lemo 1B 4pin to 2pin Fischer, for ARRI ALEXA.
K2.0010540
12V high capacity camera power cable, Lemo 1B 4pin to Lemo 2B 8pin, for ARRI AMIRA & ALEXA Mini.
K2.0010565
12V high capacity 90° angled high capacity camera power cable, Lemo 1B 4pin to Lemo 2B 8pin, for ARRI AMIRA, ALEXA Mini.
K2.0010472
12V high capacity camera power cable, Lemo 1B 4pin to Lemo 1B 6pin, for Red Epic.
K2.0010469
12V XLR camera power cable, Lemo 1S 3pin to XLR 4pin, for video cameras, ARRI SR I, ARRI SR II, Aaton.
K2.0010290
Cable to power the TRINITY system through the Top Stage from the Battery Hanger, Lemo 1B 4pin to 1B 4pin.
K2.0010291
Cable to power the system through the Top Stage from the Battery Hanger, Lemo 1S 3pin to 1B 4pin.
K2.0010292
Cable to power the TRINITY system through the Top Stage from the Battery Hanger, Lemo 1B 4pin to 2B 8pin.
K2.0024100
Cable to power the TRINITY system through the Top Stage from the Battery Hanger.
K2.0010296
External power cable to power the TRINITY head when it is used as a stand-alone Gimbal. Anton Bauer D-Tab to Lemo 1S 4pin.
K2.0014805
TRINITY Joystick Main Cable including the BNC-SMB Cable, Lemo 1B 8pin to Lemo 0B 7pin.
K2.0014801
Power and Data cable for the ARRI Starlight monitor mounted at the TRINITY Joystick Monitor Mount. Lemo 0B 5pin elbow to 0B 5pin.
K2.0014803
12V power cable for the Transvideo Starlite monitor mounted at the TRINITY Joystick Monitor Mount. Lemo 0B 5pin elbow to 0B 2pin.
K2.0014804
Spare BNC-SMB cable for the TRINITY Joystick Main Cable.
K2.0010476
4.5 GHz HD SDI BNC to BNC cable, for camera and monitor.
K2.0010546
12V power cable, Lemo 0B 2pin to 12V XLR 4pin.
K2.0010548
12V power cable for receivers with an RS power in. Lemo 0S 4pin to 3pin Fischer (RS), for ARRI & C-Motion.
K2.0010552
Main Cable with Lemo 3B, high capacity 12V/24V, 2 x HD SDI, 1 x SD, Tally.
K2.0010481
Main Cable Lemo 2B, high capacity 12V/24V, 1 x HD SDI, 1 x SD, Tally.
K2.0010461
Special tool to open the docking rings and to adjust the friction of the artemis 1.8in and 1.5in gimbals.
K2.0010434
K2.0010435
K2.0010437
K2.0010436
K2.0037206
K2.0016274
Empty Pelican 1615 Air case for the use of the foam insert which comes with the TRINITY Rig, the artemis Cine Broadcast and the artemis EFP HD.
K2.0016275
Empty SKB case 3i-2317-14BE for the use of the foam insert which comes with the TRINITY head.
K2.0010466
Rain and dust protection for the lower sled of the Cine Broadcast, EFP HD and the TRINITY battery hanger.
K2.0006960
5” OLED Monitor with touch functionality and integrated H.264 recorder (ARRI bus Interface / 3G / HD-SDI input + reclocked output / 5-44v DC power input through Lemo 0B 5pi...